Description and Specification.

Features:

Profile cutting

• Inside, outside or no tool compensation
• Multi pass cutting
• Ramp cutting to allow plunging with non
• Center-cutting tools.
• Finishing allowance for roughing tools
• Selectable leadin and leadout
• Climb or normal cut direction

Pocketing

• Automatic island detection
• Multi pass cutting
• Adjustable stepover

Drilling

• Drill from circles or points in a DXF file
• Peck drilling with controllable retract amount

Plasma Cutting

CurveCut has many useful features for plasma, laser, waterjet and oxy-fuel cutting.

For machines that have full control over the Z axis you can program the pierce height and cut height directly. This is useful for machines running Mach3 for instance.

The tool definition allows you define all of the important parameters for cutting. You can define as many tools as you like for different materials etc.

Kerf width. Draw your part the size you want and let CurveCut work out where to run the torch.
Automatic cut ordering to ensure that inside contours are always cut before outside contours.
Oxy-fuel preheat time.

Pierce delay time.
Optional ramp piercing. Instead of plunging straight in, the cutter torch can ramp in, reducing the amount of material blown back into the torch. This increases consumable life and reduces faulty cuts due to blocked or obstructed nozzles

Once you have defined you tool you can set up the cut. CurveCut gives you many options to optimise cutting.

Nesting

• Step and repeat parts
  Multiple parts can be nested on a sheet. They can be flipped and rotated to make most efficient use of the material.
• Array parts

Parts can be placed in an array to quickly fill a sheet with minimum effort.

CurveCut & Mach 3 Software are fully compatible with our LPT 2,3 and 4 axis driven kits for the mill and and Plasma

If you require any further information then please do not hesitate to contact us on Tel: (01269) 844744

 

Price CurveCut £150 Inc P&P to the UK Includes 3 Hours Telephone support.

 

Cam Software for your Mill, Plasma, water and Oxyacetylene and Laser all in one !!